Omega MoonSwatch Mars (fan)

A tribute to the Mission to Mars edition of the space chronograph, rebuilt as a standalone Wear OS watch face: a bright white dial ringed in red, three pale registers, a white tachymeter bezel, black hands with luminous inlays, and a red seconds hand sweeping over it all. THE RED PLANET Mars is the red one, and its edition wears the colour sparingly: a white dial, a thin red ring around it, a red seconds hand and a red S in the MOONSWATCH lettering. Everything else is black print on white, with pale applied markers that match the lume of the hands. TWO ROCKETS IN ORBIT The registers at 10 and at 2 do not use ordinary hands. Each carries a small red rocket, the signature piece of this edition, flying round its register with the time. THREE REGISTERS This is a chronograph-STYLE tribute, not a working stopwatch. There is nothing to start and nothing to stop: • At 6, on the register with the printed 60 scale: the running seconds, with a black hand sweeping in step with the central seconds hand rather than ticking a second behind it • At 10, on the 60 scale: the minutes. At 2, on the 12 scale: the hours. Both shown by the rockets, turning with the time like the main hands CLASSIC OR DIAL The face comes in two views: • Classic: the whole watch, with the outer TACHYMETRE bezel around the dial • Dial: a bezel-free view, zoomed so the printed dial runs right to the edge of the screen ALWAYS-ON DISPLAY THAT STILL LOOKS LIKE THE WATCH Most watch faces go nearly black in ambient mode and leave you two floating hands. This one keeps the watch on screen: the dial, the red ring, the tachymeter bezel, the applied markers, the printed minute track and all three registers stay, dimmed, with the hour and minute hands lit on top. What goes out is only what runs, because that is what costs battery: the sweeping seconds, the two rockets and the register hand at 6. You can read the time at a glance without turning your wrist, and it still looks like the watch you chose. Measured at 12 per cent of full brightness against the 15 per cent Wear OS allows. MORE • Central hours and minutes with softly cast shadows, and no complications to fill in • Standalone: no phone or companion app required • Built with Watch Face Format for smooth performance and long battery life NOTHING TO GRANT You are not asked for any permission. The face carries no code of its own. HOW TO CUSTOMIZE Long-press your current watch face and tap Edit, or open it from the picker, then pick Classic or Dial. COMPATIBILITY Wear OS 5 and later, round displays. No blend modes are used, so it is not limited to 5.1 and runs on more Wear OS 5 devices. Note for dual-chip watches (OnePlus Watch 3 and similar): their Power Saver mode only runs the manufacturer's own built-in faces, so any third-party face works in Smart mode only, and the watch warns you when you apply it. Disclaimer: This is an unofficial, fan-made watch face created by an independent developer. It is not affiliated with, endorsed by, or sponsored by OMEGA or Swatch. All trademarks and brand names belong to their respective owners and are used only to describe the design that inspired this tribute.