Omega MoonSwatch 1965 (fan)

A tribute to the white panda chronograph of the space collection, rebuilt as a standalone Wear OS watch face: a bright white dial inside a black tachymeter bezel, and three registers that do real work. THREE REGISTERS This is a chronograph-STYLE tribute, not a working stopwatch. There is nothing to start and nothing to stop: • At 6, on the register with the printed 60 scale: the running seconds, sweeping in step with the central seconds hand rather than ticking a second behind it • At 10 and at 2: the two side registers. You choose what they hold CHRONOGRAPH OR HEALTH The two side registers do one of two jobs, and you pick which one in the editor: • Chronograph: both hands parked at 12, the way a chronograph sits when it is not running. Three matching registers, one of them alive • Health: your heart rate at 10 and your step count at 2, printed in the same black ink as the rest of the dial HEART RATE AND STEPS, READ FROM THE WATCH Both figures are real readings. Steps are shortened past a thousand, so 8432 shows as 8k and always fits its register. When there is no fresh heart rate reading the face draws a dash, not a zero: a zero next to a heart would be a lie. CLASSIC OR DIAL Every look comes in two views: • Classic: the whole watch, with the outer TACHYMETRE bezel around the dial • Dial: a bezel-free view, zoomed so the printed dial runs right to the edge of the screen FOUR STYLES Two contents, times two views. All four sit in one list: one tap sets both. ALWAYS-ON DISPLAY THAT KEEPS THE WATCH ON SCREEN Most watch faces go black in ambient mode and leave you two floating hands. This one keeps the watch: the dial, the bezel, the applied markers, the printed minute track and all three registers stay, dimmed right down, with the hands lit on top and the white inlays along them reading like lume in the dark. What goes out is only what runs, because that is what costs battery: the sweeping seconds and the three register hands. Worth knowing before you buy: a white dial is the most expensive thing a watch face can leave lit. Wear OS allows an ambient screen up to 15 per cent of full brightness and this one measures 12, so the white has to come down to a deep charcoal. You read the time at a glance and the whole watch is still there in outline, but at night it is a dark face, not a white one. MORE • Central hours and minutes with softly cast shadows, and no complications to fill in • Standalone: no phone or companion app required • Built with Watch Face Format for smooth performance and long battery life NOTHING TO GRANT You are not asked for any permission. Heart rate and steps are read by the Wear OS watch face runtime, not by this face, which carries no code of its own. HOW TO CUSTOMIZE Long-press your current watch face and tap Edit, or open it from the picker, then pick one of the four styles. COMPATIBILITY Wear OS 5 and later, round displays. No blend modes are used, so it is not limited to 5.1 and runs on more Wear OS 5 devices. Note for dual-chip watches (OnePlus Watch 3 and similar): their Power Saver mode only runs the manufacturer's own built-in faces, so any third-party face works in Smart mode only, and the watch warns you when you apply it. Disclaimer: This is an unofficial, fan-made watch face created by an independent developer. It is not affiliated with, endorsed by, or sponsored by OMEGA or Swatch. All trademarks and brand names belong to their respective owners and are used only to describe the design that inspired this tribute.