Seiko SKX Diver (fan)

A tribute to the everyday automatic dive watch, rebuilt as a standalone Wear OS watch face — a 60-minute rotating dive bezel, big round luminous markers, a broad arrow hour hand and a day-date window at 3 o'clock, with a crystal reflection that slides across the glass as you turn your wrist. DIALS • SKX007 — black dial with an all-black 60-minute dive bezel • SKX009 "Pepsi" — deep blue dial with the blue-and-red 60-minute dive bezel FEATURES • A full 60-MINUTE ROTATING DIVE BEZEL with its minute scale and the luminous pip at 12 • Large ROUND LUMINOUS MARKERS around the dial, an inverted triangle at 12 and elongated markers at 6 and 9 • A broad arrow-shaped hour hand, a straight minute hand and a slim seconds hand with a luminous counterweight • DAY + DATE at 3 o'clock in a split white window — the DAY of the week on the LEFT, the DATE on the RIGHT • Printed "SEIKO" and "AUTOMATIC" in the upper half and "DIVER'S 200m" in orange in the lower half (the SKX009 adds "21 JEWELS"), plus the screw-down centre cap over the hands • Glass shine: a crystal reflection that moves as you tilt your wrist (Dynamic, driven by the motion sensor), sits fixed (Static), or is switched off (None) • A true dive watch — NO subdials, NO chronograph, NO date-only window STYLES Twelve flavors: each dial (SKX007, SKX009 Pepsi) × Dynamic Shine, Static Shine or No Shine × normal or Zoom. "Zoom" drops the bezel and lets the dial fill the screen edge to edge — choose your look in the editor. DAY COLOUR A separate editor option, independent of the flavor you pick: print the day of the week in BLACK or in BLUE. Available on both dials. MORE • Always-On Display (AOD) friendly: the dial, the shine, the day, the date, the seconds hand and the centre cap all hide, leaving only the hours and minutes so they stay legible on black (~4.2% of pixels lit at worst, far below Play's 15% limit) • Standalone — no phone or companion app required • Built with Watch Face Format for smooth performance and long battery life • Wide device support: runs on Wear OS 5 and later (no blend modes required) HOW TO CUSTOMIZE Long-press your current watch face and tap Edit (or open the face from the picker), then choose your style — dial, shine and Zoom — and, separately, your day colour. COMPATIBILITY Wear OS 5 and later, round displays. No blend modes are used, so it runs across a wider range of Wear OS 5 devices — not limited to 5.1. —— Disclaimer: This is an unofficial, fan-made watch face created by an independent developer. It is not affiliated with, endorsed by, or sponsored by Seiko. All trademarks and brand names belong to their respective owners and are used only to describe the design that inspired this tribute.