NigmaPilot

NigmaPilot turns your phone into a live-broadcast studio for drone flights: the phone camera (the pilot's face) and the drone video are combined into a single view and streamed LIVE to Instagram — no computer, no capture card. NigmaPilot is part of the Nigmagrid ecosystem. The drone video comes from a NigmaStream device on the same WiFi network — NigmaFeed running on the RadioMaster AX12 remote (supporting DJI Goggles as well as DJI Fly's Aerial mode), or the ZFPV Box. KEY FEATURES • Automatic discovery with NigmaBeacon — your RadioMaster AX12 (NigmaFeed) or ZFPV Box is detected within 1-2 seconds on the same network, with no IP configuration. • Two layout modes — VERTICAL (camera on top, drone below; 720x1280 broadcast) and HORIZONTAL (camera left, drone right; 1280x720 broadcast). • Screen split — choose Balanced, Larger Feed, or Larger Camera; can be changed mid-broadcast. • Front or rear camera — switch at any time, even while the live broadcast is running. • Built-in Instagram browser — log in, create a Live, and fetch the Stream URL + key automatically without leaving the app. • Self-healing feed — the drone video connection is continuously monitored and recovers on its own whenever the network is disrupted. • Audio from the phone microphone (AAC 44.1 kHz), or a silent broadcast when the mic is not used. • Broadcast to Instagram HOW TO USE 1. Turn on your NigmaStream device (NigmaFeed AX12 / ZFPV Box) on the same WiFi or hotspot as your phone. 2. Open NigmaPilot — the drone feed connects automatically. 3. Fetch the Stream URL + key through the built-in Instagram browser, tap START LIVE, then tap Go Live on Instagram. Done.