LumiCheck: Emergency Lighting

LumiCheck is an offline emergency lighting test log for electricians and lighting contractors who test other people's buildings. Run the annual duration test and record the minute you first find each fitting dark. Elapsed time is worked out from the moment you started, so locking the phone, closing the app, or running the battery flat loses nothing. Reopen and the test is still going. At the end you know which fittings did not hold their rated duration and when each one dropped, which is what a remedial quote is built from. WHAT IT DOES Duration test timer - Start the discharge and walk the building. Elapsed time is derived from the start, never from a counter that stops when the app does. - Hourly prompts through the test, and a prompt when the target elapses. - Mark a fitting the moment you find it dark. That time is a first observation, not the instant it failed, so the fitting held at most that long and the report says so. - Runtime against rated duration per fitting, tracked across annual tests. Luminaire register - One register per site, with maintained, non-maintained, sustained, exit sign and central battery fittings. - Stick a QR label on the housing and open a fitting's history by scanning it. - Floor, zone, lamp type, battery type and rated duration on every fitting. Standards - US NFPA 101 (2021) sets the cadence: a functional test not less than 3 weeks and not more than 5 weeks apart, lasting at least 30 seconds, and an annual test of at least 90 minutes. - UK BS 5266 and BS EN 50172: monthly functional test, and an annual test for the fitting's full rated duration. - Chosen per site, so a mixed portfolio is handled correctly, and the standard is stamped on each test when it starts. Test report PDF - Inspection and test record with the full luminaire schedule, achieved runtime, lux readings and per-fitting result. - Defects and remedial actions table for the quote. - Technician name, company, accreditation number and signature, as entered by you. LumiCheck does not verify credentials. Follow-up - A 24-hour recharge re-check after a discharge test, because a cell can hold its duration and then never take a charge again. - Test due reminders, with a diagnostic screen when the phone is blocking them. Lux readings are typed in from your own calibrated meter, and the report names the instrument. The phone's light sensor is not used: it is uncalibrated and cannot defend a figure to an inspector. A spot reading is one measurement, not a survey. Your site records stay on the device. There is no account and no cloud sync. The app sends crash and usage diagnostics, and the standard tier shows ads. WHO IT IS FOR Commercial electricians, emergency lighting contractors and facilities engineers who test emergency lighting across a portfolio of client sites and have to hand over a record afterwards. If you keep the fire logbook for a single premises you look after yourself, FireBook is the better fit. LumiCheck is a record-keeping and audit-assistance tool. It does not substitute for a competent person's judgement, certified electrical inspection, or sign-off by the fire authority or authority having jurisdiction. Contact: [email protected] Privacy: https://clearstackapps.com/privacy