StageRemote

StageRemote is a dead-simple Bluetooth remote for your Bose L1 Pro or Bose S1 Pro+ system — with the one control the official app leaves out: a true MASTER FADER. Set the balance between your three channels once, then ride the whole mix up and down together with a single fader, just like the master bus on a real mixing console. Your channel levels stay put; the master scales what actually reaches the speaker. BUILT FOR THE STAGE • Master fader — move all channels together without losing your balance. • Three channel faders with clear dB readouts and live signal / limiter indicators. • Mute per channel and a master mute. • Thumb-only grab on the faders so a stray touch never nudges your mix. • The screen stays awake while you play — no auto-lock mid-set. • Editable channel names, saved on your device. • Portrait and landscape layouts, dark and easy to read on dim stages. SCENES (VENUE RECALL) Save the setup for a room you play often under its name. Next time, pick it from the list and StageRemote brings your channels back to that mix — names and levels restored, ready in seconds. RECONNECTS THE RIGHT WAY If Bluetooth drops mid-show and comes back, StageRemote reads what the speaker is actually playing and matches it — it never forces its own levels onto your live sound. HOW TO CONNECT 1. Turn on your Bose system and connect to it in the official Bose app. 2. Keep the Bose app open and open StageRemote. 3. Wait until StageRemote shows CONNECTED, then close the Bose app completely. Only one app can control the speaker at a time, so the Bose app must be closed once StageRemote is connected. PRIVATE BY DESIGN No account. No internet. No analytics. No ads. Everything stays on your device — the only thing StageRemote talks to is your speaker, over Bluetooth. — StageRemote is an independent app and is not affiliated with, endorsed by, or sponsored by Bose Corporation. "Bose", "L1" and "S1" are trademarks of their respective owner and are used here only to describe compatibility.