Control for Afore

Inverter Control for Afore gives you full online control of every inverter setting—including safety and grid-protection parameters. Change them from your phone as if you were standing at the device, but faster, more clearly and without travelling to the installation. On verified BNT005KTL and BNT006KTL models, the protocol exposes protection ranges of 100.0–400.0 V for overvoltage and 10-minute average thresholds, 50.0–250.0 V for undervoltage, 101.0–320.0 V for overvoltage recovery and 50.0–230.0 V for undervoltage recovery. The model, firmware and grid code may narrow the values accepted by the device. Two ready-made Smart Presets make safe, repeatable configuration faster. “253 V Protection” enables 10-minute average-voltage protection at 253.0 V / 3.00 s and sets both fast thresholds to 264.5 V / 0.20 s. “Efficient” disables 10-minute average protection and sets threshold 1 to 271.0 V / 14 s and threshold 2 to 272.9 V / 15 s; before use, it displays a clear own-risk and responsibility warning. The app always shows the inverter, current value and target value and requires confirmation. You get: • the complete settings catalogue: startup and connection parameters, voltage and frequency protection, active and reactive power, power factor, Q(U), P(f), P(U), control curves, export limitation and reconnection; • live production and power monitoring, L1/L2/L3 voltage, frequency, PV inputs, temperature, operating state, errors and alarms; • history, charts and period comparisons, installation weather and PDF reports; • “253 V Protection” and “Efficient” Smart Presets with a clear preview of every threshold and delay before writing; • push, email and in-app alerts when an inverter needs attention; • versioned snapshots of the full configuration with controlled restore; • safe writes: read before change, stale-data protection, read-back verification, rollback on mismatch and a complete audit trail. FREE supports 1 inverter and live data without saving history. PRO supports up to 5 inverters and unlocks history, alerts, reports, settings and Smart Presets. If PRO expires, history is protected for 30 days and the app warns you before scheduled deletion. Installer plans add a dashboard for 25 or 100 installations, team access, invitations and activity history. Data is processed on private EU infrastructure. No ads. Visible and editable settings and available values depend on the model, firmware, country/grid code and functions made available in hardware or software by the device and its manufacturer. Protection parameters must be changed in accordance with the documentation and grid-operator requirements, at the user’s own risk and responsibility. Inverter Control for Afore is an independent app and is not affiliated with, sponsored, authorised or endorsed by Afore.