PAW MCom

PAW MCom - The app for the configuration, control and monitoring of the HeatBloC® MC systems of PAW. The app now also allows the hydraulic balancing of radiators* (does not apply to radiant floor heating systems). Via WLAN, the PAW MCom app gives access to the temperatures, the differential pressure, the revolution speed, the flow rates* and the output* of the connected HeatBloC® MC heating circuits. All relevant system values are clearly displayed in the app. The heat distribution is thus made transparent, allowing you to optimise the energy flows yourself if necessary. Restrictable radiators in two-pipe heating systems can now be hydraulically balanced via the app.* Therefore, the design heating load of all rooms, the desired room temperatures and the design thermal output of all radiators are entered first. This is followed by a collective optimisation of the heating characteristic curve(s) of all heating circuits. Afterwards, the radiators are restricted according to the specifications of the app with the help of a presettable thermostatic valve or via the return screw connection. In general, one measurement of each heating circuit is enough. As a final step, a report will be generated which will be attached to the subsidy application. This app allows a free arrangement, designation and configuration of the heating circuits in an easy and comfortable way. By means of the integrated support function, the data of the connected installation can be transmitted directly to PAW for analysis. Important note: The integrated demonstration function allows to test the majority of the range of functions. For the complete use of the app, a connection to a PAW HeatBloC® MC system with communication set (item no. 1398730) is necessary. If necessary, the WLAN range can be enlarged by means of a PowerLine case (item no. 1398736) within the building. * only with Grundfos UPM3 DN 25 and DN 32