Thunda Dash

Know your panel before it trips. Thunda Dash is a visual map of your home electrical panel that shows how much headroom every breaker actually has left. MAP THE PANELS Add any number of panels, then breakers with their slot, room, amp rating and wire gauge. The breaker rail lays them out as a two-column grid of slots with load bars coded comfortable, tight or overload. LIVE HEADROOM Add loads to a breaker, or pick from a built-in library of forty common appliances, and the effective current and usage answer straight away - the eighty per cent continuous-load rule included. WIRE CHECK Breakers rated higher than their wire can carry are flagged. STORM TEST Build a scenario - Sunday dinner, say - switch everything on at once, and see which breakers hold, which run tight and which trip on start-up, with a storm meter over the lot. REBALANCE SOLVER Up to five load moves that would lower the worst breaker in a panel, applied in one tap. TRIP LOG Record a trip with its cause and the current at trip. Repeat offenders are highlighted. THE WHOLE HOME Total demand against your combined mains at a glance, with panels, breakers and trips over the last thirty days counted beside it. PRIVACY Everything stays on your phone. No account, no sign-in, fully offline, no tracking. A NOTE All numbers are planning estimates only. Have a licensed electrician verify any wiring change.