G-Alert

G-Alert makes configuring compatible GSM alert and tracking devices simple. Instead of memorizing complicated SMS command codes, use G-Alert's guided interface to select the configuration you need and prepare the appropriate command. G-Alert then opens your phone's own messaging app with the command and recipient already prepared. Review the message and tap Send when you are ready. HOW G-ALERT WORKS 1. Select the device you want to configure. 2. Choose the required configuration command. 3. Enter or select the required settings. 4. G-Alert prepares the appropriate SMS command. 5. Your phone's messaging app opens with the command ready. 6. Review the message and tap Send. G-Alert does not automatically send SMS messages. Your phone's messaging app handles the actual sending. KEY FEATURES Multi-Device Manager Save and manage multiple compatible GSM devices. Give each device its own name and phone number, then switch between devices whenever required. Admin Number Setup Register your phone number as the device administrator using a guided command. Alert Configuration Configure supported alert settings, including: - Open - Close - Open & Close Zone Settings Configure monitoring zones and zone-alert settings for compatible devices that support geofencing or zone-based alerts. Voice Record Commands Prepare and send supported voice-recording commands to compatible devices. SMS Notification Groups Configure two notification groups—SMSG1 and SMSG2—so your device can send alerts to the required phone numbers. Phone Number & Device Status Set or retrieve the configured device phone number and check available device information, including: - Device status - Configured phone number - Firmware version Retrieved information is stored locally on your phone for convenient reference. Reset Command Quickly prepare the supported reset command when you need to reset the device configuration. Built-In User Manual Access the complete user manual directly from the app. The manual is bundled with G-Alert and can be viewed offline. Password Protection Protect access to G-Alert with a password. You can change the password whenever required. PRIVACY & PERMISSIONS G-Alert is designed with a local-first approach. The app does not require: - SMS permissions - Location permissions - Contacts permissions - Camera permissions - Microphone permissions G-Alert does not require a backend server and does not include analytics or third-party tracking. Your saved device information and configuration data remain on your device. Because G-Alert uses your phone's own messaging app to send commands, you review and authorize each message before it is sent. For more information, please refer to our Privacy Policy. WHO IS G-ALERT FOR? G-Alert is designed for users who configure compatible GSM-based alert, alarm, and tracking devices using SMS commands. It is useful for device owners, installers, technicians, service personnel, and anyone who regularly needs to configure supported GSM devices. DEVICE COMPATIBILITY G-Alert is designed for compatible GSM devices that support the command formats implemented by the application. Available commands and configuration options depend on the device model and supported firmware. For supported device models or compatibility information, refer to the product documentation or contact SiFe Engineering support. IMPORTANT G-Alert prepares commands for your compatible GSM device; it does not replace the device's GSM network, SIM card, hardware, or firmware. Successful command execution depends on factors such as device compatibility, device power, GSM/network availability, SIM service, and the configuration supported by the device. G-Alert — GSM Device Configuration Made Simple.