H2G Monitoring

Hydro2Geotech field monitoring, on your phone. H2G instruments heavy-civil construction — highways, transit, tunnels, dams, utilities and the structures beside them — and this app is where that data lands. Owners, engineers, inspectors and field crews see the same live and historical readings, from the site or from the office. WHAT YOU CAN SEE - Site cameras — live PTZ streams with pan, tilt and zoom, plus day-by-day photo history and time-lapse video for any view. - Vibration — live waveform and per-axis levels from automated seismographs, with the alert thresholds drawn in. - Noise — continuous sound levels, the active weighting profile, and where it is in its cycle. - Geotechnical instruments — in-place inclinometers, ShapeArrays, extensometers, piezometers and total-station prism networks, each with its own depth profile or time series. - Equipment status — the health of the field units themselves: battery, solar, disk, CPU temperature and when each one last reported. BUILT FOR THE FIELD Filter by site, equipment type, device and date. Tap any instrument to see where it physically is on a map. Charts are made to be read in sunlight and one-handed on a phone, not shrunk down from a desktop dashboard. Every reading carries the time zone of the site it came from, so a reading taken at 23:30 on an Ohio job does not appear under yesterday's date because you happen to be in Seattle. FOR H2G FIELD TECHNICIANS A Bluetooth diagnosis tool connects directly to a field unit you are standing next to — reads what the unit says about itself, and sends it commands — without a laptop and without a network connection. Both the always-on units and the low-power loggers are supported. ACCESS An H2G account is required. Sites and devices are assigned by an administrator, and the app shows only the equipment your account has been granted. If you have an account but no equipment yet, your administrator has not finished provisioning it. The app collects no location data, contains no advertising, and includes no third-party analytics or tracking. ABOUT HYDRO2GEOTECH Hydro2Geotech (H2G) LLC is a geotechnical, structural and environmental monitoring subconsultant serving heavy-civil public works across the United States, with offices in Washington, Ohio and California. We instrument construction sites and report what the ground and the structures around them are doing, continuously, while the work goes on. hydro2geotech.com 206-373-1885