PT Plus Configurator

Configure the flush. From your phone. The PT Plus Configurator reads, programs and verifies RNC PT Plus programmable piezo switches over the RNC USB-UART converter. No laptop, no guesswork: connect, see every setting the product is running, change what needs changing, and every value written is read back and verified. IMPORTANT: this app is a professional tool for RNC hardware. It requires an RNC USB-UART converter and a PT Plus product to do real work. Without them the app opens normally and shows "No converter connected" - there is nothing to configure until hardware is attached. SEE WHAT THE PRODUCT IS DOING Live view of the connected product: valve open or closed, the active program, and the timers counting down in real time - flow time, security time, hygiene flush cycle, product lock. Plug the converter in and the app connects by itself. CONFIGURE EVERY SETTING Program mode, valve type, flow and security times, delays, product and clean locks, hygiene flush cycle, duration, type and delay, touch sensitivity, standby. Change what you need and save: only the changed settings are written, then each one is read back and checked. A green result and a beep means verified. PROGRAM WHOLE PRODUCTION RUNS Batch mode is built for the bench. Arm once, then plug products in one after the other: each is read, programmed, verified and confirmed with a beep and a buzz - no tapping between units. Every product's previous settings are kept in the session, so any unit can be restored. The run stops itself when the count is reached or the bench goes quiet. SETTINGS THAT TRAVEL Export any configuration as a preset file, email it to site, import it there. Copy a proven product and use it as the master for a run. Prepare a whole job at the office with no product connected. BUILT FOR THE FIELD Works offline after a one-time activation. No account, no sign-up, no ads, no analytics. The app collects almost nothing and says exactly what it does collect - see the privacy policy. LICENSING Reading and browsing are free. Programming requires an activation code, supplied with your order, or a one-time free trial per device with the length and terms shown before it starts. Licences: [email protected]. PT Plus is RNC's programmable piezoelectric switch platform for water control in sanitary and industrial installations: public showers, washrooms, hygiene flushing, legionella prevention and more. Learn more at rnctec.com.