Qmax Water Level Controller Live

Qmax Water Level Controller turns your overhead tank or sump into a connected one. Pair the Qmax sensor to your Wi-Fi, and the app shows the real level of your tank on your phone at home or anywhere else and runs the pump for you. REAL-TIME TANK LEVEL • Live water level, updated as the sensor reports it • Motor status at a glance running, stopped, or paused • Battery, voltage, current and solar charge for the sensor unit • A clear timestamp, so you always know how fresh the reading is • An offline banner the moment the sensor or your phone loses connection AUTOMATIC PUMP CONTROL • Set an ON level and an OFF level the controller fills the tank and stops on its own • Switch to manual any time and start or stop the pump with one tap • Silent time: choose quiet hours in which no new fill begins DRY-RUN AND MOTOR PROTECTION • Dry-run protection trips the motor when the pump runs without water • Overload protection stops the pump before it is damaged • "Tank not filling" alert when the level does not rise while the motor runs • Set your master power reference yourself, or let the controller measure it on the next fill ALERTS ON YOUR PHONE • Push notifications for dry-run protection and tank overflow warnings • Low battery warning for the sensor unit • In-app banners for every fault the controller reports USAGE HISTORY • Tank level and battery charts over the last 6 hours, 24 hours, 7 days or 30 days • Pump cycles, total runtime and average level for the period • Spot a leak, a slow-filling line, or a pump running more than it should SIMPLE SETUP • Sign in with your mobile number and an OTP no password to remember • Add a new sensor over Bluetooth: pick your Wi-Fi network, enter the password, and the device connects • Or scan the QR code on the unit to add it in seconds • Guided sensor install and tank calibration, so readings match your real tank depth • Name each tank, and switch between units if you look after more than one MADE FOR EVERY DAY • Light and dark theme • Uncluttered screens built for a quick glance • Works on Android phones and tablets Requires a Qmax water level sensor and a Wi-Fi network within reach of the tank. Bluetooth and location permissions are used only during device setup to find your sensor and list nearby Wi-Fi networks. Notification permission is used to deliver pump and tank alerts.