Dilution Calculator

PLEASE NOTE This app works out the strength of a diluted liquid. It is not about discounts or money. The figures are for mixing one liquid into another by volume; dissolving a powder or a solid is not covered. ────────── ◐ Dilution Calculator － a 3-fold dilution is not three parts of water A 3-fold dilution is one part concentrate to two parts water: three parts in all, giving 33.333333 %. Add three parts of water and you have four parts — a 4-fold dilution at 25.000000 %. The same figure 3, read two ways, differs by 1.333333 times in strength. That difference is what this app is for. ■ Three tabs ▪ From the factor － enter a dilution factor, get the strength in % and in ppm, and the ratio ▪ From the amounts － enter concentrate and water, get the factor, the finished amount and the strength ▪ % and ppm － enter a percentage, get ppm and the dilution factor The first tab also works the other way round. To make 500 mL at 3-fold, measure 166.666667 mL of concentrate and 333.333333 mL of water. The water is the amount you want less the concentrate, so the two figures on screen add back up to exactly what you asked for. ■ "3-fold" and "1:3" are one step apart A Japanese 3-fold dilution is 33.333333 %. A 1:3 written in English is 25.000000 %. One counts how many times the finished volume is; the other gives the ratio of concentrate to water. The gap grows as the number gets smaller: 1.500000 times at 2, and 1.100000 at 10. When you read a product or a recipe from abroad, check which of the two it means. ■ 1 % is 10,000 ppm Exactly ten thousand times, and it is the only figure worth remembering. Move the decimal point four places to the right and a percentage becomes ppm. 0.1 % is 1,000.00 ppm, 0.05 % is 500.00 ppm, and 5 % is 50,000.00 ppm. ■ Two quick charts Factors of 2, 3, 4, 5, 10, 20, 100 and 1000, with the strength and the mix for each. Strengths of 0.02, 0.05, 0.1, 1 and 5 %, with the ppm and the factor for each. ■ Six decimal places, on purpose Strength is shown to six places, far enough that 33.333333 % divided by 25.000000 % comes to 1.333333 on the screen itself. Round them shorter and the figures on one screen stop agreeing with each other. ■ When it helps ・A label says "3-fold" and you are not sure how much water that is ・You want 500 mL and need to know how much concentrate to measure ・A label abroad says 1:3 and you want to know whether that is the same ・Something is written in ppm and you want it as a percentage ■ What is not here ・No product or chemical names, and no set strength for any purpose. Follow what is printed on whatever you are using ・No figures for dissolving a powder or a solid, because the volume afterwards is not the sum of the two ・No molarity and no normality ・No advice on handling, or on combinations that must not be mixed ■ Features ・No account needed. The calculation runs on your device and your figures are never sent anywhere ・One screen, no settings page ・Japanese and English, by device language ・History of the last five entries ・Copy the whole result with one tap ・No stored data at all: division and subtraction only ────────── NISAKE GAME