Plumb Concrete PRO

POUR IT RIGHT, ORDER IT ONCE, KEEP THE RECORD. Plumb Concrete Pro is a focused concrete and masonry calculator — size the pour, count the bags, lay out the steel, and keep every number with the job. No paper pad, no second app, no account. SIZE THE POUR • Yardage — slabs, footings, and piers/columns in feet and inches give cubic yards and 80 lb bag counts, with an optional overage %. • Bag vs. bulk — turn cubic yards into pre-mix bag counts and pallet loads for 40, 50, 60, or 80 lb bags, with a nudge toward ready-mix on the big pours. • Base & gravel — the sub-base under a slab in cubic yards and tons. LAY OUT THE STEEL & BLOCK • Reinforcement — a rebar grid at 12", 16", or 24" on center gives total linear feet and the number of 20 ft sticks with the lap splice folded in, for #3–#6 bar; or size welded-wire mesh sheets for the area. • Masonry — net wall area gives block or brick counts, mortar bags, sand, and grout for filled cells. FINISH THE DETAILS • Slope & drop — the total fall across a run at your pitch, for flatwork drainage. • Control joints — max joint spacing and cut depth from the slab thickness. • Mix order — build a ready-mix spec (strength, slump, aggregate, air, admix, fiber) as one clean line to text the supplier. KEEP THE JOB • Every takeoff saves to an on-device job ledger — search it, pin it, reopen it. • Roll the saved pours into a project cubic-yard total, and text the order straight to your supplier. • Export a clean, branded PDF or PNG, or a .plumb backup, when you choose to. • English and Spanish, in the app and in the exports. Free to download with a one-time Pro unlock — no subscription, no ads, no account. Your jobs stay on the device and leave only when you share or export them. A note on accuracy: these are fast field estimates, not an engineering or code determination. Confirm structural, mix-design, nailing, and safety-critical numbers with your engineer, your supplier, and current local code.