EverWatch Vessel Monitoring

EverWatch is the app for the EverWatch marine monitoring controller. It shows what the controller installed aboard your boat is reporting, and tells you and your crew when something needs attention. REQUIRES AN EVERWATCH CONTROLLER AND A MONITORING PLAN The app works only with an EverWatch controller installed on your vessel and an active EverWatch monitoring plan for that controller. Without a controller there is nothing to show, and vessel setup cannot be completed. ALARMS FROM THE CONTROLLER • Bilge pump activity and run time • High-water float switch • Shore power and DC supply voltage • Temperature, humidity and impact at the controller • Wireless sensors paired with the controller: smoke detectors, door and hatch sensors, motion sensors, and cabin temperature and humidity sensors • Set the limits for each alarm, or turn it off ENGINE DATA OVER NMEA 2000 • RPM, coolant and oil temperature, oil pressure, boost, alternator, fuel rate and engine hours, where your engines report them • A record of each engine run • Tanks, battery banks, transmissions and speed when they are on the network WHO GETS ALERTS • Push notifications for everyone on the vessel, plus email, text message and phone call for the people you choose • Allowed hours and a time zone for each person; critical alarms (high water, bilge pump, smoke, anchor dragging and engine emergencies) can reach them at any time • If nobody acknowledges an alarm, follow-up calls go to the people set up for calls • Alert history shows every alarm, who was told, how, and who acknowledged it • On Vessel Mode mutes motion, door, shore power and temperature alerts while you are aboard; safety alarms stay on LOCATION AND ANCHOR WATCH • The vessel's position on the map and its distance from home • A geofence that alerts if the boat moves farther from home than the distance you set • An anchor alarm with an adjustable radius SMARTLOG AI • A maintenance log for the vessel: work done, equipment, engine hours, costs, photos and documents • Read an invoice: photograph it or choose a PDF, and SmartLog AI fills in the entry for you to check before anything is saved. Invoices are sent for AI reading only after you allow it, and you can turn that off at any time • Maintenance tasks and reminders based on your service history and engine hours • A spares list that counts down as parts are used • Download the log as a PDF logbook or a spreadsheet (CSV), or share a link that works for 7 days with a surveyor, insurer or buyer SHARE THE VESSEL Invite family, crew or a captain. Each person has a role (admin, manager or viewer) that decides what they can see and change. When the boat changes hands, the owner can hand ownership to another member. CONTROLLER SETTINGS Connect the controller to Wi-Fi over Bluetooth from the app, see how it is connected, and install firmware updates. Sign in with Google, Apple or email. Questions: [email protected] or 1-855-572-5556.