Rake Wall Calc

Rake Wall Calc is the framer's rake wall calculator from Level Up Framing. Enter the wall, get every stud length, the top plate layout and the speed chart, all rounded down to the nearest 1/16". FIELDCALC (opens instantly, no account needed) • Bottom plate length in feet, inches and fractions. • Short point of the wall, plate to plate. • Total rise by pitch, angle or tallest point. Pick one and the other two fill in so you can check your work. • Outputs: top plate length, the first (shortest) stud, the last (tallest) stud, and a full speed chart of stud lengths at 8, 12, 16 or 24 inches on center. • Plate settings for plate thickness and count, collapsed out of the way. • Check any stud position with the Stud/King list. SHOP DRAWING MODE (free account) • Single slope, gable and offset gable walls. • Windows, doors and beam pockets, including sloped and peaked window heads on the rake. • Full cut list with check boxes: studs, plates, headers, trimmers, cripples, blocking and sheathing, cut lengths quoted to the short point. • Wall diagram with dimensions, square-up diagonals and a full screen view. • Print the wall or send it as a link or QR code. • Crews: share walls with your crew and keep the cut list in sync between the cut man and the nail man. • CUT IT! timer: race the cut list against par and your own best times. • Saved walls sync to your account across devices. Free to use. Level Up Framing teaches every skill it takes to frame a quality home, and this calculator is part of that tool box. Framing references in the app are reference only, not authority. Your plans, your engineer and your inspector have the final say.