FlickerSpec: LED Flicker Test

Your LEDs shouldn't be giving you headaches. FlickerSpec turns your phone into a flicker meter, measures them at 240 frames per second, and compares what it finds against published flicker limits. Built for engineers, lighting designers, facility managers, and anyone tracking down eye strain under LEDs. WHAT YOU MEASURE Quick Measurement (free, unlimited) Live readout: • Dominant flicker frequency in Hz • Percent Flicker (modulation depth) and Flicker Index • Signal-to-noise ratio and confidence rating • Live luminance waveform and FFT spectrum • Achieved frame rate 3-Minute PstLM Measurement (Pro) A tripod capture for documenting low-frequency flicker: • Short-Term Flicker Severity (PstLM) per IEC TR 61547-1:2015, for flicker up to 90 Hz • Compared against the PstLM ≤ 1.0 limit cited by EU Ecodesign 2019/2020 (PstLM only; Ecodesign also needs SVM, beyond FlickerSpec's 240 fps phone-camera pipeline) • 8x oversampled LM flickermeter checked against all five IEC Table A.1 vectors • Camera-based measurement aid, not an accredited instrument or certified result THE VERDICT FlickerSpec applies IEEE 1789-2015 Recommended Practice 1, the low-risk level: modulation must stay under 0.025 x frequency below 90 Hz, and under 0.08 x frequency from 90 Hz to 1250 Hz, above which flicker is unrestricted. A custom percent-flicker threshold is also available and applies to the badge, the saved record and the PDF. The verdict has three states: FAIL when the measured depth exceeds the limit, PASS when the capture and framing support it, and Can't confirm when they do not. DOCUMENTATION AND REPORTS Save measurements to sessions with location label, fixture photo, GPS and notes. Export single-measurement or session-summary PDFs, or CSV. Reports carry your company header, the verdict with the standard and threshold behind it, real measurement uncertainty, the FFT spectrum, and the calibration certificate reference. FlickerSpec is a screening and documentation aid, not an accredited laboratory instrument; whether a report satisfies a particular surveyor or regulator is their determination. CALIBRATION IS FREE Before measuring, point your phone at the free companion calibration web app on any monitor. FlickerSpec verifies its frequency accuracy against the known signal and issues a timestamped certificate valid for 30 days. WHAT IT CAN AND CANNOT SEE A 240 fps camera has limits, and we state them. The method is designed for 50 Hz mains regions: • 50 and 100 Hz (50 Hz mains) — frequency and modulation depth • 60 and 120 Hz (60 Hz mains, e.g. North America) — the dominant frequency may still be identifiable, but depth and verdict are conditional because 240 fps is an exact multiple of both. The app reports Can't confirm when it cannot sample the whole cycle. • Above 120 Hz, including PWM dimmers and kHz drivers — outside camera bandwidth Depth also depends on framing: fill the region of interest with the light, or treat it as a lower bound. FREE VS PRO Free, no account: • Unlimited Quick Measurements with every raw metric, live waveform and FFT spectrum • Calibration and certificate generation Pro — $49.99 one-time, no subscription: • IEEE 1789-2015 risk indication (PASS / FAIL / Can't confirm) • 3-Minute PstLM Measurement with a PstLM threshold comparison • Measurement logging with GPS, photos, and location labels • Single-measurement and session-summary PDF reports, CSV export • Calibration certificate document display • Report header with your company name and logo TECHNICAL SPECIFICATIONS • 240 fps constrained high-speed Camera2 capture, ITU-R BT.709 luminance, exposure and white balance locked during measurement • Standards: IEEE 1789-2015 Recommended Practice 1, IEC TR 61547-1:2015 Annex A, IES TM-39-25, Commission Regulation (EU) 2019/2020 • On-device storage only, no cloud, no account, no tracking Privacy Policy: https://flickerspec.slick-engineering.workers.dev/privacy