DYNAMIC NATION

Instructions for electronically controlled shock absorber mini-program: Bluetooth button (top left corner): Tap to connect/disconnect the electronic control system of the shock absorber. Blue indicates connected status, under which all current setting values of the electronic control system will be displayed on the page. Gray indicates disconnected status. Upgrade button (top right corner): Tap to upgrade the electronic control system. Speed range and corresponding damping setting: Users can customize 4 speed ranges and the shock absorber damping value corresponding to each speed range. Operation method: Double-click the speed label to pop up the speed range adjustment slider dialog box. Click √ or × after setup to close the dialog box. Slide the red and blue sliders under the speed label to set the shock absorber damping level for the currently selected speed range. Click √ below to confirm and save, or click × to cancel. (Note: The higher the compression and rebound damping level, the more aggressive the shock absorber performance.) Front & rear compression, rebound response level / body sway suppression level: ◆Tap the number line below to pop up the specific setting dialog for each item. The higher the response level value of compression and rebound, the stronger the corresponding compression and rebound effect. The higher the body sway suppression level value, the more obvious the suppression of vehicle body sway. ◆Tap the 'i' icon next to the body sway suppression level to pop up a schematic diagram showing the comparison of body sway effects. Calibration: Tap to pop up the calibration dialog box. This function is generally used to detect the horizontal level of the vehicle body in the front-rear (y) / left-right (x) direction after shock absorber installation. The reset button can reset the ball to the center position of the scale.