N7500 Dashboard

N7500 Dashboard is a native Android app for controlling and programming the VGC/Vero VR-N7500 — a headless, phone-controlled amateur radio with no keypad or display of its own — directly from your phone over Bluetooth, no cable required. An alternative control app for radios that use the HT app. Built and tested against the Vero VR-N7500. Should also work with the rest of the Benshi-protocol radio family, which shares the same Bluetooth command set: Vero VR-N7600, VR-N75, VR-N76; Retevis RT99, RT78; BTECH UV-Pro, UV-50PRO, GMRS-Pro; Radioddity DB50-B, GA-5WB; Radtel RT-660, RN15; ZASTONE D9000APP. FEATURES • Live dashboard — frequency, mode, signal strength, squelch, TX power, and Work Mode (Single/Dual/Scan), all synced from the radio in real time • Full channel editor — frequency, name, repeater offset (with automatic RX calculation), CTCSS/DCS tone, TX power, bandwidth, scan membership, and mute, with a real confirmation step before any write to the radio • Groups — save and load full 32-channel sets • Favorites — up to 3 channels reserved and always available, in every Group • Roam — pull in the nearest repeaters from RepeaterBook based on your current location, with Auto Roam to keep them fresh automatically as you travel • Long-press quick actions for scan toggle and mute that write instantly, no dialog — built for drivers who need to click and go • Tablet-friendly layout N7500 Dashboard runs entirely on your device — no account, no cloud sync of your radio data. The one exception is Roam, which is opt-in: using it sends your approximate location to RepeaterBook.com to look up nearby repeaters. See the in-app Privacy Policy foIs all of the user data collected by your app encrypted in transit details. NOTE: This app requires a VGC/Vero VR-N7500 or a compatible Benshi-protocol radio to connect to over Bluetooth. It's a companion control app for hardware you already own, not a standalone tool. Built by an amateur radio operator, for amateur radio operators.