CNC Laser Pro - Engrave & Cut

CNC Laser Pro — G-code generator for laser engraving, laser cutting and CNC milling, right from your phone or lay out a whole job on one design sheet. Photo engraving, vector laser cutting from SVG/DXF files, text engraving and CNC profile milling — no PC, no subscription. The app sends the finished G-code straight to your machine over Bluetooth, USB or WiFi (GRBL, Mach3 and industrial controllers). A photo from your phone, G-code on your laser in minutes. No PC, no subscription. 12 days free, then a one-time purchase. PHOTO LASER ENGRAVING Photo engraving with 12 modes: 10 dithering algorithms (Floyd-Steinberg, Stucki, Bayer…), grayscale and halftone engraving. Brightness, contrast, gamma and sharpening right in the app — your image is ready to engrave in minutes. DESIGNER Text, photos, SVG/DXF drawings and shapes on one sheet, burned as a single laser job. Text on an arc, cut-out letters with bridges, combined shapes and grid arrays — everything burns exactly where you place it. VECTORIZE Turn a photo or logo into a cuttable vector with one tap and a live preview — outline or centerline, multiple gray levels. No drawing software needed for laser cutting. LASER CUTTING AND ENGRAVING Vector laser cutting from SVG and DXF files: multiple passes, kerf compensation, lead-in and lead-out, per-layer power and speed. A material test grid helps you find the best engraving settings for any material — save them as presets. Burn preview before you start. TEXT ENGRAVING Engrave labels, nameplates and dates with built-in or your own (TTF/OTF) fonts — fill, outline or single-line mode, in a few taps. CNC MILLING SVG/DXF import with engrave, outside and inside profile modes and true cutter radius compensation (G41/G42). Multi-step depth of cut, holding tabs for profile cuts. 7 post-processors: GRBL, Mach3, Fanuc, Haas, Siemens, Mitsubishi, Okuma. 6 CNC material presets with realistic defaults. MACHINE CONTROL AND G-CODE SENDING 3D toolpath preview, then G-code transfer straight to the controller: Bluetooth, USB serial, WiFi, FTP. Built-in jog control (manual X/Y/Z moves, adjustable step and speed) and work zero setting (X/Y/Z) — position your machine from your phone. Live machine state and position on GRBL. Export to file, USB drive, SD card or as a QR code. Supported controllers: GRBL, Mach3, FluidNC, Smoothieware and industrial CNC machines. WHO IS IT FOR? Hobby laser engravers (Ortur, Atomstack, xTool, Sculpfun), CNC professionals and makers who need fast G-code in the workshop without a PC. Wood, leather, acrylic, plywood, anodized aluminum — nameplates, gifts, logos, keychains, photos on wood. Built-in user guide in 7 languages: English, German, Hungarian, Spanish, Italian, French and Portuguese. IMPORTANT — SAFE USE CNC Laser Pro generates G-code from your settings. Check every parameter (power, speed, depth, tool diameter) before starting the machine, and always do a test run at minimum power or in DryRun mode. The developer accepts no liability for damage caused by incorrect settings or improper use of the generated G-code. The machine operator is always responsible for safe operation.