App Intel

BulbSync - Bulb Timer Remote Live

davidgargonza1 app · 14 installsPhotographyFreecom.bulbsync

Bluetooth intervalometer for Sony and Canon: bulb timer, timelapse, remote

Alert me★ WatchOpen in Play ↗
Total installs
14
exact · Play shows —
Installs / day
—
measured after our second crawl (about a day)
Rating
—★
— ratings · — reviews
Released
—
—
Last update
25 Sept 2026
v4.0.0 · 16d ago
Countries
0/1
live · checked 22h ago

Install history

exact counter from Google Play
13.715.316.818.42010 Oct11 Oct11 Oct
13.715.316.818.42010 Oct11 Oct11 Oct

Installs per day · last 90 days

Not enough history yet — check back tomorrow

Change timeline

No changes recorded yet. We compare every crawl with the previous one and list title, icon, screenshots, description, version, price and availability changes here.

Country availability

Live 0Listed, not installable 1Not listed 0
United States

Top countries

Country data will be available soon.

We estimate where downloads come from using the app’s position in Google Play’s top charts in about 140 countries. This app is not in any chart we have collected yet; the estimate appears as soon as it is.

Top chart positions

Not in any tracked top chart.

App manifest

Read this app's manifest from Google Play: permissions, declared SDKs, components and AdMob app ID. Saved analysis appears here automatically.

Manifest analysis reads only the required APK ranges. Base APK downloads may need separate device splits to install.

Permissions

8 in 2 groups
1 Sensitive3 Notable4 Routine

What this app can do with your phone

  • Know your exact location using GPS, Wi-Fi and mobile networks
LocationSensitive1

Access to where your device is, using GPS or network signals

  • Know your exact location using GPS, Wi-Fi and mobile networksprecise location (GPS and network-based) · ACCESS_FINE_LOCATION
OtherNotable7

Access to miscellaneous device features that don't fit other categories

  • See Bluetooth settings and connect to paired devices like headphones, speakers or watchespair with Bluetooth devices · BLUETOOTH
  • Turn Bluetooth on or off and find and pair with nearby Bluetooth devicesaccess Bluetooth settings · BLUETOOTH_ADMIN
  • Keep your phone's processor or screen from going to sleep, which can use more batteryprevent device from sleeping · WAKE_LOCK
  • Check whether you are online and whether you use Wi-Fi or mobile dataview network connections · ACCESS_NETWORK_STATE
  • Connect to the internet to load content and send datafull network access · INTERNET
  • Make your phone vibratecontrol vibration · VIBRATE
  • Check with Google Play that you got this app legitimatelyGoogle Play license check · com.android.vending.CHECK_LICENSE

Sensitive = can reach personal data, location, camera/mic or act on your behalf. Notable = changes how your device behaves. Routine = normal for almost every app. Source: Google Play's permission list for all versions of this app.

Store listing

Full description
Fire your camera without cables from your phone: bulb, intervalometer and timelapse over Bluetooth, using the same protocol as its own remote (Sony RMT-P1BT, Canon BR-E1). Control several cameras at once, even from different brands, shooting in sync from a single session. Astrophotography, star trails, timelapses, photogrammetry, VR/360 and multi-angle. SHOOTING CONTROL • Bulb for exactly the duration you set, or exposure decided by the camera. • Intervalometer with countdown and estimated finish time. • Anti-vibration delay and focus lock: no contact with the camera, no refocusing on every shot. • Automatic reconnection after a Bluetooth drop: the session carries on, screen off included. • Signal alerts before you lose a camera, with an optional alarm. • Red night mode, to preserve dark-adapted vision. • Presets, camera groups and session history. BULBSYNC STICK • A small device that stays beside the camera and runs the session from start to finish, with no phone required: lock it, walk away or switch it off. When you are back, the app catches up on what happened. • Exposures last what you ask for: it measures how long each camera takes to open and close the shutter and compensates for it, with several cameras too. • Several cameras and up to three groups shooting at once on a single Stick, each with its own sequence. • Progress on its own screen, with three views to choose from, and speaker alerts if a camera drops or the battery runs low. • Its battery gives about 6 hours of shooting (measured with 320 one-minute exposures, none missed) and over ten in standby; for a whole night, power it over USB-C from any power bank. • We sell no hardware: it runs on an M5Stack M5StickS3 board you buy yourself. The first install is done from a desktop browser, in one click; from then on, updates arrive from the app. Requires BulbSync Pro. WILL IT WORK WITH YOUR CAMERA? • Sony: any Alpha with "Bluetooth Remote Control" — α7 III/IV/V, A7C, A1, A7R IV, A7S III, A9 II, A6100/6400/6600/6700, ZV-1, ZV-E10, RX100 VII and similar. α7 III and α7 IV verified in the field, with BulbSync Stick too. • Canon: bodies with a "Remote" mode (the BR-E1 one) or "Connect to smartphone". EOS R7 verified in the field. With BulbSync Stick, same protocol, pending verification; EOS R6 Mark II only through the Stick. • Nikon (ML-L7 remote): implementation complete, currently being verified on real bodies. If you own one, help us close it: run it with debug mode on and send us the log, or write to [email protected]. Check your camera's menu for a Bluetooth remote control mode. The full model list, with what is verified with the app and with the Stick, is at bulbsync.app FREE One camera, one preset and the last session in history. A single purchase, no subscription, removes the limits: unlimited cameras and presets, groups, full history, backup, the advanced options and BulbSync Stick. No account, no ads, no tracking and no internet connection required: everything stays on your phone. Diagnostic log sharing, if it is ever needed, is yours to turn on.

What's new

First public release of BulbSync: fire your Sony or Canon camera over Bluetooth, no cables. • Bulb for exactly as long as you set, intervalometer and timelapse, with countdown and end time. • Several cameras firing in sync, even from different brands. • Sessions keep running with the screen off and reconnect on their own if Bluetooth drops. • Red night mode, presets, groups and history. • BulbSync Stick (Pro): a device beside the camera runs the session with no phone required.

Growing in Photography

Category →