AutoS

AutoS puts your warehouse shuttle fleet in your hands. Connect straight to the PLC over your local Wi-Fi network and run, monitor and tune every device from your phone or tablet - no laptop, no HMI terminal. BUILT FOR THE WAREHOUSE FLOOR Operators connect to a shuttle in seconds and drive a full cycle without leaving the aisle. Engineers get the parameter and IO detail they need for commissioning and fault-finding. SUPPORTED EQUIPMENT - 2-Way Shuttle - 4-Way Shuttle - Stacker Crane - Lift + Conveyor Works with Siemens S7-1200 and ET200 PLCs over S7 communication. RUN OPERATIONS Start inbound, outbound, compacting, multi-inbound, multi-outbound, recall and pallet-count cycles. Manual controls cover forward, backward, lift up and lift down at selectable speeds. Stop and clear-error are always one tap away. SEE WHAT THE MACHINE SEES - Live telemetry: position, speed, battery, load and running mode - Alarm history with date-range filtering - Raw IO signal state for every sensor, lock and light - Pallet count results after each counting run TUNE WITH CONFIDENCE Read and write PLC parameters: distances, offsets, battery thresholds and the full speed profile for manual, home, putting and picking motion. Every write is confirmed before it is sent, and the parameter and IO pages sit behind a password so only authorised staff can change machine behaviour. STAY CONNECTED The app shows which Wi-Fi network you are on and detects a dropped PLC link immediately, so you are never left guessing whether a command landed. ENGLISH AND VIETNAMESE Full interface in both languages, switchable at any time. REQUIREMENTS AutoS is a companion app for Vinatech shuttle systems. It requires a compatible shuttle PLC reachable on the same local network and an account issued by your administrator. It is not a standalone app and has no function without this equipment.