Membrane Mind

Every filtration plant knows the morning when the product flow drops by a quarter and someone wants to clean the membranes. Often the only thing that changed is the water temperature. Other times the membranes really are fouling, slowly, and nobody notices until the output is gone. Raw readings cannot tell the two apart. Membrane Mind can. Enter each shift's gauge and meter readings: feed, reject and product pressure, product and reject flow, water temperature, and dissolved solids in the feed and product water. Membrane Mind works out recovery, salt passage and pressure drop, then corrects the product flow and salt passage to the conditions just after your last cleaning, allowing for temperature and the pressure actually pushing water through. You see one honest figure, normalised flow, and a plain verdict: healthy, near the limit, or clean now. The trend shows flow and salt passage since the last cleaning against the limits you set for each plant, and how many days are left at the current pace. Log every cleaning and membrane change; the readings after it become the new baseline, and each cleaning shows how much flow it brought back. Everything sits on one scrolling page: Today, Trend, Cleanings and Settings, with chips at the top to jump between them. Pressures in bar or psi, flows in litres an hour, several plants on one phone. Membrane Mind tracks membrane condition from your own readings. It is not a water-quality or drinking-water safety test. It has no prices, no sales and no sign-in, and keeps everything on the phone.