EZViewer Pro for KiCad

View your KiCad PCBs and schematics on your phone or tablet — no laptop needed. The fastest way to check a design at the soldering bench, in a meeting or in the field. ■ Supported files - Boards: .kicad_pcb (KiCad 4 – 10) - Schematics: .kicad_sch (KiCad 6 – 10), including hierarchical sheets - Footprints: .kicad_mod - Zipped project folders — open the board and every sheet at once ■ Built for assembly and repair - BOM & assembly mode: parts grouped by value and footprint. Pick a line to light up every location on the board, then check parts off as you place them. Progress is saved per board. - Net highlight: long-press a pad or track to light up the whole net. - Find parts & nets: search by reference, value, MPN or net name and jump straight to it. - Tap info: tap a pad or part to see its reference, value, footprint, net and side. - Bottom view: flip the board to see the bottom side the right way round. - Cross-probing: jump from a symbol in the schematic to its footprint on the board, and back. ■ View & measure - Toggle, recolor and solo individual layers - Measure between pads, pins and vias in 7 units (mil, mm, inch …) - Navigate hierarchical schematic sheets - Light and dark canvas - Share the current view as PNG or PDF ■ Fast and private - Opens large boards of tens of megabytes in seconds. - Works completely offline. Your files never leave your device. - No ads, no feature limits. Try it right away with the built-in sample project (board + 3-sheet hierarchical schematic). Contact: [email protected] KiCad is a trademark of its respective owner. This app is an independent viewer and is not affiliated with, sponsored or endorsed by the KiCad project or the Linux Foundation.