Egrowr Classic Live

Egrowr Classic keeps you connected to your Egrowr Classic monitor, at home or away. COMPATIBLE DEVICES This app works with Egrowr monitors whose 10-digit serial number starts with 101 or 102. You can find the serial number on the back of your monitor. Egrowr Pro devices with serial numbers starting with 105 are not supported. An Egrowr Classic monitor is required to use the app. LIVE READINGS AND GRAPHS Follow air temperature, humidity, conductivity (EC), acidity (pH), water temperature, light and calculated VPD, where supported by your monitor. Explore historical graphs and slide along a curve to read values smoothly. View data over 24 hours, 7 days or 90 days. CLOUD ALARMS AND NOTIFICATIONS Set low and high limits while connected to Egrowr Cloud, see which readings exceed a limit and receive push notifications on your phone. The app shows connection status separately from alarm warnings. Use the Test notification button in Settings to check notifications on your phone. Cloud access requires an Egrowr account, an internet connection and a monitor connected to the cloud. LOCAL AND CLOUD CONNECTIONS Connect to your monitor on the same Wi-Fi network using its local IP address, or access cloud-connected monitors remotely. Manage multiple compatible monitors and choose your preferred language and measurement units. FIRST SETUP Use the separate Egrowr WiFi app to configure your monitor's Wi-Fi connection, then switch the monitor to CLOUD mode. Add the monitor in Egrowr Classic using the IP address shown on its display and link it to your Egrowr account. Wi-Fi configuration and firmware updates are handled separately from this app.